EmbalmPro help

Support for EmbalmPro

Find instructions for the screen you are using, understand what each action changes, and keep your saved information protected.

How can we help?

Menu names and available features can vary by app version. If a control is not shown, email us before deleting the app, resetting data or replacing a backup.

Support topics

Cannot find Settings, Edit, Save, or More

iPhone, iPad and Android

Secondary views have their own actions. This is usually navigation hierarchy, not missing data.

What to do

  1. Return with Back to a main tab: Fluids, Analysis/Case Analysis, Calculator/CH₂O, Reports/Embalmer’s Report, or SDS.
  2. Tap the gear to open Settings. For a product or condition, open its detail page and tap Edit. For a report, open the report and look for Save at the top.
  3. Tap More (three dots) on the specific detail page for its record or output actions. On Android, the device Back control also returns one level.

What to expect

The relevant page actions appear. Favorites is reached from Fluids, not a sixth tab.

Before changing saved information

Back from a changed editor may check whether there was unsaved information. Choose Keep Editing if unsure; Discard loses only that unsaved draft.

Keyboard covers a control or the page will not scroll

iPhone, iPad and Android

The keyboard, an open dropdown, or dragging on the body drawing may be taking the gesture.

What to do

  1. Close any dropdown by tapping outside it.
  2. iPhone/iPad: use Done above the keyboard when available, or scroll the form to dismiss it. Android: use Android Back once to hide the keyboard, or tap outside the entry.
  3. Scroll using a blank margin or ordinary text, away from the body outline. Return to the page action bar for Save.

What to expect

The keyboard or menu closes and the remaining form is reachable.

Before changing saved information

Do not repeatedly press Back through an unsaved-change prompt. Do not tap an existing body mark merely to dismiss the keyboard; it can remove the mark and description.

Wrong Light/Dark appearance, or preference seems forgotten

iPhone, iPad and Android

Appearance is an app preference. Android follows the device until a choice is made; iOS resolves its initial appearance to an explicit Light/Dark preference.

What to do

  1. Return to a main tab and use its sun/moon control.
  2. Or open Settings: iOS → Appearance → Light or Dark; Android → Appearance → Dark mode switch.
  3. Reopen the affected detail page. If the colors still look wrong, save any edits, close and reopen the app once.

What to expect

The selected app appearance applies across the app and is remembered.

Before changing saved information

Appearance changes do not reset the database. A full restart can lose unsaved drafts; save first.

Find version, help, About, or the Welcome screen again

iPhone, iPad and Android

On iPhone/iPad, the version is at the bottom of Settings and About reopens Welcome. On Android, About and subscription management have separate pages.

What to do

  1. iOS: main tab → gear → scroll to the bottom for Version and Build. Use About EmbalmPro for Welcome, subscriptions, legal links, references and support.
  2. Android: main tab → gear → About EmbalmPro for app information; person Guide / Help for topics; Subscription / Restore Purchases for access.
  3. If Android About does not show the requested version, use the phone’s App info for EmbalmPro and report its version.

What to expect

You can find your app information and reach the appropriate help or subscription page.

Before changing saved information

Opening About or the guide does not change saved records. Get Started from iOS About returns to Settings; that is expected.

Support email, legal link or guide will not open

iPhone, iPad and Android

The handoff depends on an available email/web application and connection; it is not a reference-database operation.

What to do

  1. iOS: gear → About EmbalmPro → Contact Support / Having issues? or View person Guide as appropriate.
  2. Android: gear → person Guide / Help for topics; About EmbalmPro for app information; Subscription / Restore Purchases for billing access. If no Contact Support link is present, compose manually to support@embalmpro.net.
  3. For a web link, confirm internet and try the visible destination in the browser. For email, verify an email application/account is configured, or manually address a message to support@embalmpro.net.
  4. For the guide, select its Contents/topic; iOS Done leaves the guide, Android Table of Contents or Back returns to topics.

What to expect

The appropriate guide topic, browser page or email draft opens; you can also email support manually.

Before changing saved information

Opening an email draft is not proof that a message was sent. Do not include private case records, passwords or payment details. Do not reset the database for an external-link problem.

Welcome appears every launch, or no longer appears

iPhone, iPad and Android

The ordinary Welcome preference is separate from current subscription access.

What to do

  1. iOS: with active access, Welcome → turn on Don’t show this screen again → Get Started. To reopen later: main tab → gear → About EmbalmPro.
  2. Android: on Welcome/About, with active access, check Don’t show this screen again if shown → Get Started. Reopen through gear → About EmbalmPro.
  3. If professional features remain locked, use the subscription procedure rather than expect this preference to bypass access.

What to expect

The preference controls ordinary Welcome display. About remains accessible; iOS can still force Welcome when access is unavailable.

Before changing saved information

This is not purchase, cancellation, data restore or a guaranteed subscription bypass. Android Get Started can leave Welcome without granting professional access.

Large text or orientation cuts off labels or controls

iPhone, iPad and Android

Screen size, accessibility text/display scaling and layout can affect available space; a clipping defect also remains possible.

What to do

  1. Close menus and dismiss the keyboard, then scroll to the control. Use a blank margin rather than a body marker.
  2. Note your text size, display size and screen orientation. You can compare another orientation, but keep the text size you need.
  3. In View Solution Strengths, scroll through the reference cards to reach Done.
  4. If a control is still cut off, email us the screen name, device and a screenshot with private details covered.

What to expect

Content becomes reachable or a reproducible accessibility/layout issue is identified.

Before changing saved information

Do not permanently remove accessibility settings as a workaround. Save drafts before restarting or making larger changes; do not reset app data for layout clipping.

Tab change returned to a root screen or an unfinished form is missing

iPhone, iPad and Android

iOS tab changes dismiss the keyboard and broadcast a navigation reset. Android guards dirty navigation with Save/Keep Editing/Discard where applicable. Draft state is not the same as a saved record.

What to do

  1. Before leaving an editor, tap its Save and verify success. Choose Keep Editing if a leave prompt appears while investigating.
  2. If already on another tab, return to Reports and clear search. Reopen the last saved report, if any.
  3. For a newly opened calculator report, use Save Embalmer’s Report opened a form but no saved case exists: its own report Save must complete. If unsaved text is gone, check any PDF/export retained before reentering.

What to expect

Returning to a main tab does not mean a saved report was deleted. Clear the Reports search and check the last saved version.

Before changing saved information

Switching tabs or closing the app is not Save. An unsaved draft may not be recoverable; Reset Database will not recover it.

No Fluids Found, fewer products than expected

iPhone, iPad and Android

Search and active browse filters restrict the list. A hidden product is also omitted.

What to do

  1. Fluids → clear the search field using its clear control or erase all text.
  2. If browsing By Use, tap Switch back. Manufacturer → All (iOS) or All Manufacturers (Android); Type → All. Android: tap Done to close the manufacturer menu.
  3. Alternatively tap Reset Filters when shown. If the specific product is still absent, go to Settings → Hidden Fluids and check Recover a hidden factory fluid.
  4. If the whole list appears stale, use Fluids → three-dot menu → Refresh.

What to expect

Visible products return without changing stored products. A product can still be absent if hidden or not in this installed database.

Before changing saved information

Reset Filters clears the saved manufacturer preference too, affecting ordinary Analysis suggestions and report product menus. Refresh is not Reset Database.

Manufacturer selection is hard to undo or unexpectedly includes several brands

iPhone, iPad and Android

Manufacturer is multi-select. Selecting another brand adds it; it does not replace the previous brand.

What to do

  1. Fluids → Switch back if currently browsing Use → Manufacturer.
  2. Tap a checked manufacturer again to unselect only that manufacturer. To clear the restriction entirely, tap All on iOS or All Manufacturers on Android.
  3. Android: tap Done. iOS: reopen the menu as needed to change additional brands.
  4. Review Type and search separately; those can still narrow the list.

What to expect

Only intended manufacturers remain checked; All means no manufacturer restriction, not zero results.

Before changing saved information

Unselecting a manufacturer does not hide or delete its products. This saved preference also affects ordinary Analysis suggestions and report product dropdowns.

Type or Use does not deselect when tapped again

iPhone, iPad and Android

Type and Use are single-choice menus; they are not manufacturer-style multi-select toggles.

What to do

  1. Open the active Type or Use dropdown.
  2. Select All to remove that restriction, or choose another value to replace it.
  3. Clear the search text too if results are still narrow.

What to expect

The selected Type/Use changes or returns to All.

Before changing saved information

This changes discovery only; it does not edit a product’s stored Type or Use.

Manufacturer and Type disappear when By Use is tapped

iPhone, iPad and Android

This is the separate Use browsing mode, designed to avoid over-restrictive combined filters.

What to do

  1. Use mode: choose Use to search across manufacturers and types; clear search text if needed.
  2. Tap Switch back to return to Manufacturer and Type.
  3. Check that the earlier Manufacturer and Type choices return. Tap By Use again to revisit the previous Use choice.

What to expect

Only the active mode restricts Fluids. Inactive choices are retained while switching modes.

Before changing saved information

By Use does not clear the manufacturer choices used by Case Analysis. Search and browsing choices are working selections, not a permanent record of your work.

Chemical count does not shrink with filters; searches behave differently

iPhone, iPad and Android

Total Chemicals is the visible database total before filters, not the current match count. Search scopes differ by screen/platform.

What to do

  1. Confirm which screen is being searched. On Fluids, try the product name alone, then manufacturer alone, with filters at All.
  2. iOS Fluids searches name, manufacturer, Type, Use, displayed index and color as a text phrase. Android main Fluids uses the displayed browsing fields with a text phrase.
  3. iOS Favorites searches name/manufacturer/Use; Android Favorites has broader stored-field token discovery. SDS search on both platforms uses product name and manufacturer, not every safety paragraph.
  4. On Android Favorites/SDS, “total matches” includes “match product names”; do not add those counts together.

What to expect

You can find the record with a supported search and interpret counts correctly.

Before changing saved information

Search does not edit data. A zero count does not prove data was deleted.

Recover a hidden factory fluid

iPhone, iPad and Android

Hide removes visibility, not the underlying product. Active filters may still conceal an unhidden fluid.

What to do

  1. Main tab → gear → Hidden Fluids.
  2. Find the product → tap Unhide.
  3. Return to Fluids → clear search and set Manufacturer/Type to All, or Reset Filters.
  4. Open the product. If it still will not appear in suggestions, inspect Discontinued and the condition’s index range.

What to expect

The fluid is removed from Hidden Fluids and can appear in browsing again, with its saved edits/SDS retained.

Before changing saved information

Unhide does not replace edits, clear Discontinued, or automatically add a Favorite. Do not reset the entire database just to unhide one fluid.

Hide versus permanently delete a fluid

iPhone, iPad and Android

Factory records are hideable; person-created records are permanently deletable.

What to do

  1. Open Fluids → product → More.
  2. If the goal is only to stop marking it as a Favorite, choose Remove Favorite instead. If it is factory data, Hide → confirm hides it.
  3. For a person-created product, do not confirm Delete unless you specifically wants to erase that product and its SDS. Cancel returns without deletion.
  4. To recover a hidden factory record use Recover a hidden factory fluid. For a deleted custom record, stop and assess existing backups; there is no Recently Deleted Fluids page.

What to expect

The intended operation is distinguished before confirmation. Historical report snapshots are not rewritten by removing a reference product.

Before changing saved information

deleting a person-created fluid removes its local product/SDS and favorite membership. No built-in Undo. Resetting factory data will not recreate a deleted custom fluid.

Product remains browsable but is not suggested

iPhone, iPad and Android

Discontinued deliberately retains reference access while excluding the fluid from suggestions.

What to do

  1. Fluids → product → scroll to Discontinued.
  2. If the flag was set by mistake and should be changed, turn it off (iOS switch; Android checkbox). It saves immediately.
  3. Reopen the relevant condition and check suggestions, including manufacturer selection and index range.

What to expect

Discontinued status changes; the product becomes eligible only if the remaining suggestion rules also match.

Before changing saved information

This changes saved status immediately without a separate Save. Ordinary Edit/Save and Unhide do not clear Discontinued. Do not change actual product status merely to force a recommendation.

View Solution Strengths missing or preset figures misunderstood

iPhone, iPad and Android

The iOS launch control requires a Type containing vascular and a nonempty index; Android shows it for the recognized VASCULAR FLUID type. Invalid indexes can show an unable-to-calculate message. This reference is separate from body-weight planning.

What to do

  1. Fluids → open the product → verify its stored Type and Index.
  2. If View Solution Strengths is offered, tap it to open the six one-gallon preset cards: 1.25%, 1.75%, 2.00%, 2.75%, 3.50%, 4.25%. Read both concentrate and remaining water/supplemental volume.
  3. The preset cards are references, not selectable saved settings. Tap Done to close. For body-weight totals and a saved report, use Calculator or a condition’s Use Fluid workflow instead.

What to expect

Preset reference values use a final 128-oz gallon and do not create saved presets or reports.

Before changing saved information

Do not reclassify a nonvascular product or invent its index to reveal the control. The preset names are not a substitute for case assessment.

Product detail omits blank properties

iPhone, iPad and Android

Current detail views omit some blank stored information. Missing text is not necessarily a broken control or a negative value.

What to do

  1. Open the product in Fluids and confirm its manufacturer/name.
  2. If needed, tap Edit to inspect the stored fields, then Cancel without changing anything.
  3. If source information is genuinely missing, collect verified manufacturer material and use an intentional edit or contact support the data correction.

What to expect

The person distinguishes blank stored fields from a display failure and can identify a specific missing field.

Before changing saved information

Blank does not mean No, Not Applicable or safe. Do not populate guessed information. Deliberate blank Save overwrites the old field.

Add a fluid, or saved field is blank/wrong

iPhone, iPad and Android

Draft was not saved, filters hide the result, a field was deliberately cleared, or the wrong record was opened. Android does not enforce every field the iOS editor does.

What to do

  1. Fluids → Add Fluid for a new record, or open the existing product → Edit.
  2. Enter/confirm Fluid name, Manufacturer, Type, Use and Index as applicable; review manufacturer instructions without guessing missing values.
  3. Tap Save. If an error appears, keep the editor open and correct the named issue. iOS requires a nonblank product name.
  4. Return to Fluids → clear search/filters as needed → find and reopen the saved record.

What to expect

A new record appears, or the existing record shows the saved changes; adding does not itself create a complete SDS.

Before changing saved information

Save can intentionally overwrite a field with blank text. Renaming edits the same record; avoid Add Fluid when intending to correct a name. Custom records can be permanently deleted.

Cancel or Back asks about unsaved changes

iPhone, iPad and Android

There are changes in the current draft.

What to do

  1. To retain the entries on screen while investigating, tap Keep Editing.
  2. To keep the changes permanently, use Save in the editor; for a report, Save can also appear in the leave prompt.
  3. To abandon only the current unsaved changes, choose Discard. If the editor was unchanged, Cancel/Back can close it immediately.

What to expect

The editor stays open, saves successfully, or leaves without keeping that draft, according to the choice.

Before changing saved information

Discard is not deletion of a previously saved record, but it does throw away unsaved additions/edits. Printing/exporting is not a substitute for saving the report.

An edit does not appear elsewhere

iPhone, iPad and Android

The change may still be unsaved, a previously opened page may need to reload, or you may be reading an older report. Saved reports retain their own recorded information.

What to do

  1. Finish Save in the original editor and note any error.
  2. Go Back and reopen the record. For Fluids/SDS/Favorites lists, use the page’s More → Refresh if still stale.
  3. If the “old” value is inside an already saved report, edit that report separately: it is a snapshot, not a live link.
  4. If necessary, save all other drafts and close/reopen the app once.

What to expect

Reference pages show the saved value; historical reports retain their recorded contents until explicitly edited.

Before changing saved information

Do not use Reset Database to make a personal edit appear; it would remove edits to factory records.

No matching conditions; category selection disappears

iPhone, iPad and Android

Core Category and Risk Model are mutually exclusive, and their saved choice remains active until reset.

What to do

  1. Analysis or Case Analysis → clear the search field.
  2. Core Category → All, or Risk Model → All. Reset Filters clears search and the active category.
  3. Search the condition name, rather than text from its treatment instructions.
  4. If it is still missing, Settings → Hidden Conditions → Unhide if listed.

What to expect

Matching visible conditions return; only one category restriction is active.

Before changing saved information

Reset Filters affects condition discovery, not report data or the fluid manufacturer preference. There is no dedicated Analysis Refresh action in these screens.

Add/edit/unhide a condition

iPhone, iPad and Android

An unsaved edit, search/category restriction, or hidden status may explain absence.

What to do

  1. Analysis/Case Analysis → Add Condition, or open an existing condition → Edit.
  2. Enter/confirm its name and verified guidance; tap Save. If an index-range warning appears, use Index range warning; saved condition has no suggestions.
  3. To recover a hidden factory condition: gear → Hidden Conditions → Unhide; then clear Analysis filters.
  4. To hide: condition detail → More → Hide → confirm. For a custom condition, More → Delete is permanent; do not use it as a reversible hide.

What to expect

Saved condition appears under matching searches; Unhide retains its edits.

Before changing saved information

HIGH for custom Delete: no Recently Deleted Conditions or Undo. Factory Hide is reversible. Factory Reset replaces factory condition edits; it is not targeted recovery.

No Suggested Use Fluids for a condition

iPhone, iPad and Android

Suggestions require visible, non-discontinued vascular fluids, nonblank manufacturer, and a valid index inside the condition’s range. Regular suggestions also apply the saved manufacturer restriction.

What to do

  1. In condition details, turn Favorites only off to check ordinary suggestions.
  2. Go to Fluids → Switch back → Manufacturer → All / All Manufacturers. Android: Done. Do not rely on By Use to clear the saved manufacturer.
  3. Return to the condition. Check the displayed index range and, for a specific product, its Type, Index and Discontinued status; check Hidden Fluids if needed.
  4. If this is a custom condition without a valid range, correct it through Edit using Index range warning; saved condition has no suggestions.

What to expect

Eligible suggestions appear, or the remaining missing/invalid eligibility information is identified.

Before changing saved information

Do not invent safety guidance, broaden a clinical index range, or alter product data just to populate a list. Fluids Type/Use/search do not determine condition suggestions.

Favorites only is empty, or shows a different manufacturer

iPhone, iPad and Android

Favorites only intentionally bypasses manufacturer restrictions but still enforces vascular type, index range, hidden/discontinued status and product manufacturer presence.

What to do

  1. Fluids → Favorites → confirm the intended fluid is saved; clear the Favorites search.
  2. Open that product and check its Type, Index, hidden/discontinued state.
  3. Reopen the condition → Favorites only on. To see ordinary manufacturer-filtered suggestions, turn it off.
  4. If no favorite qualifies, choose an actually appropriate saved favorite or keep the switch off; a favorite alone is not automatic eligibility.

What to expect

Only eligible favorites appear across manufacturers; turning off restores ordinary suggestions.

Before changing saved information

Switching Favorites only does not delete/unfavorite anything or select a fluid for the calculator. Do not change a manufacturer preference to “fix” the intentional bypass.

Index range warning; saved condition has no suggestions

iPhone, iPad and Android

A single index, a one-sided boundary, reversed range, or nonnumeric input is not a usable two-endpoint condition range.

What to do

  1. Condition detail → Edit → CH₂O Index.
  2. Use a verified lower-and-upper range in the supported format, for example >20<30. Both endpoints are included despite the symbols.
  3. Tap Save. If no reliable range is available, choose Save Without Suggestions rather than invent one.

What to expect

A valid range supports matching; Save Without Suggestions keeps the condition without index-based products.

Before changing saved information

Editing a factory range is a personal override. The example is formatting guidance, not a recommendation for that condition.

Not every eligible product appears; list ordering changes

iPhone, iPad and Android

Suggestions are capped: with no manufacturer restriction, up to three per manufacturer nearest the range midpoint; with selected manufacturers, up to seven per manufacturer in name order.

What to do

  1. Check whether Favorites only is on and whether manufacturers are restricted.
  2. Find the product directly in Fluids to confirm it exists; inspect eligibility separately.
  3. Use Favorites only with an eligible saved product when appropriate, or search Fluids directly for reference information.

What to expect

You can distinguish ranking/capping from missing data. Even Favorites results retain grouping/caps.

Before changing saved information

The suggestion list does not show every qualifying fluid. A product’s absence from the short list does not by itself mean it is unsuitable.

Index shortcuts or suggested-fluid arrows do something unexpected

iPhone, iPad and Android

Shortcuts compute a one-gallon dilution. Use Fluid is the separate calculator handoff; the detail arrow is informational.

What to do

  1. Condition detail → Calculate Dilution → select an index shortcut to see vascular concentrate plus water/supplemental volume totaling 128 oz.
  2. To use a commercial product with the condition context, go to Suggested Use Fluids → Use Fluid, not the detail arrow.
  3. In Calculator, verify condition, strength, index and product; enter weight and review body composition before Calculate.

What to expect

The shortcut result stays on the condition; Use Fluid opens the calculator with the selected product/context.

Before changing saved information

Shortcut values are not a stored product selection or a saved report. Five-point index steps do not produce fixed-ounce differences.

Dilution shortcut is blank, invalid, or shows negative remaining water

iPhone, iPad and Android

The one-gallon formula requires a finite positive numeric strength and index. A strength above the chosen index produces concentrate greater than the final 128-oz volume, so the subtraction can be negative. This is an input/formula limitation to review, not a mixing instruction.

What to do

  1. Record the condition, stored STRENGTH (%) value, selected index or product index, and all displayed amounts.
  2. Check the original manufacturer/condition source for a transcription or unit error. Use only a verified correction through Edit; do not invent a new index or strength.
  3. If the values are intentional or the source is unclear, stop using that displayed mixture and contact support with the numeric values and screenshot.

What to expect

A verified entry error is corrected, or we have the exact values needed to investigate. Do not use an unexplained negative remaining-water amount.

Before changing saved information

Do not tell you to use a negative water amount, ignore the final volume, or change clinical guidance simply to force a valid-looking result. Save only a verified intentional record correction.

Favorites is empty or one favorite disappeared

iPhone, iPad and Android

Search can hide a saved favorite; hidden records are omitted. Removing membership or deleting the app/data can also explain it, but establish history before diagnosing loss.

What to do

  1. Fluids → Favorites → clear its search. More → Refresh if needed.
  2. Find the product in Fluids and inspect its star; if unselected, tap once to add it. Or product → More → Add Favorite.
  3. If the product is missing from Fluids, use Hidden Fluids to unhide it. Return to Favorites.
  4. If still absent, check whether there was reinstall, Clear storage, device change or Android backup import before changing anything else.

What to expect

A visible saved favorite appears. Main Fluids manufacturer/type/use restrictions do not restrict the Favorites list. On iOS, Favorite Fluids shows the number of favorites matching its current search. This differs from the main Fluids Total Chemicals count, which is calculated before its list filters/search.

Before changing saved information

Do not delete or reinstall the app to recover Favorites. Restore Purchases checks subscription access; it does not recover local Favorites.

No removal star on Favorites cards

iPhone, iPad and Android

The star was deliberately omitted here to prevent accidental unfavoriting.

What to do

  1. Favorites → open the product using its name or detail arrow → More → Remove Favorite.
  2. Or return to main Fluids and tap that product’s filled star once.
  3. To reverse, add it again using the Fluids star or Fluid Details → More → Add Favorite.

What to expect

Membership changes; the fluid/SDS remains in the database.

Before changing saved information

Remove Favorite removes only membership, not the product. Keep it distinct from Hide or Delete in the same detail menu.

Use Fluid missing, or calculator has no strength/condition

iPhone, iPad and Android

Use Fluid here requires VASCULAR FLUID with a finite positive index. Favorites supplies product/index, not a case’s required strength.

What to do

  1. Favorites → product detail → confirm Type and Index. Do not change actual product classification simply to expose the button.
  2. For an eligible favorite, tap Use Fluid; verify the product/index, then enter strength and weight before Calculate.
  3. For condition-prefilled strength, use Analysis → condition → Suggested Use Fluids → Use Fluid instead.

What to expect

The correct input context is understood; eligible favorites open the calculator with product/index.

Before changing saved information

iOS opens a separate contextual calculator, so its standalone main-tab calculation may differ. Android Use Fluid replaces the shared working calculator inputs/context. No report is saved merely by opening either calculator.

Calculate fails or fields look filled but nothing calculates

iPhone, iPad and Android

Required input is blank, zero, negative, nonnumeric, nonfinite, or formatted unexpectedly.

What to do

  1. Calculator/CH₂O → enter a positive numeric Weight in pounds, Strength as a percent number (for example 2), Volume in ounces (128 for one gallon), and Index.
  2. Use plain decimal numbers without unit symbols, % signs or grouping commas. On Android remove leading/trailing spaces if typing copied values.
  3. Select M/F and Body Composition, dismiss keyboard, tap Calculate. If an error appears, correct that field and Calculate again.

What to expect

Results appear for valid inputs; placeholder text is not accepted as a real entry.

Before changing saved information

Do not override a case’s appropriate strength just to bypass validation. Capture suspect results before Reset.

Results vanish or stay different after editing an input

iPhone, iPad and Android

iOS invalidates results for mixture-input changes and recalculates an existing result for weight/sex/body composition. Android also distinguishes mixture keys from body inputs.

What to do

  1. After changing Strength, Volume or Index, tap Calculate again.
  2. Check Weight, M/F and Body Composition. Entering through Use Fluid supplies product or case information and may replace the calculation you were working on.
  3. Compare the method and units shown beside each result. If needed, send us the exact inputs and outputs without case identifiers.

What to expect

Fresh results correspond to current inputs; sex/body-composition choices affect Scientific rather than the Standard dilution.

Before changing saved information

Calculator Reset clears the working calculation and context; it does not erase saved reports. Existing report snapshots do not update automatically.

Above very strong warning appears

iPhone, iPad and Android

This is an intentional advisory, not a calculation failure or maximum limit.

What to do

  1. Read the exact entered strength and the condition’s guidance.
  2. If it was a typing mistake, correct it. If it is intentional, review appropriateness using professional judgment before proceeding.
  3. Tap Calculate with the verified values; do not lower a clinically intended strength solely to hide the warning.

What to expect

4.25 itself does not trigger this warning; a value above 4.25 does. Valid calculations are not blocked by it.

Before changing saved information

The guide explains app behavior, not case-specific treatment. contact support unresolved clinical/formula questions to the app owner rather than inventing advice.

Ounce differences between indexes are not equal

iPhone, iPad and Android

Standard concentrate equals Strength × Volume ÷ Index; the relationship is inverse, not a fixed subtraction.

What to do

  1. Confirm that Strength and Volume are identical for both comparisons.
  2. For one gallon, set Volume to 128 and compare the displayed index values.
  3. Example arithmetic only: at 2.75% and 128 oz, index 20 gives 17.6 oz, 25 gives 14.08 oz, and 30 gives about 11.73 oz before display rounding.

What to expect

Smaller ounce savings at successive equal index steps are mathematically expected.

Before changing saved information

This example explains the arithmetic only. It is not recommended treatment for a particular case.

Standard, Scientific, volume, bottles or report quantities seem inconsistent

iPhone, iPad and Android

Standard uses your strength, batch volume and index. Scientific estimates demand using weight, body composition and index. These are different quantities; report entries also need to be checked against your intended volume.

What to do

  1. Note all inputs and the exact result labels before changing anything.
  2. Use 128 oz when comparing a one-gallon mixture. If you entered another volume, the Standard concentrate amount refers to that batch.
  3. Open Calculation Notes to distinguish per-gallon figures, total solution and theoretical bottles. The 2×/3× labels do not multiply the entered strength.
  4. If a result or the amount copied into a report does not make sense, email us all the numeric inputs, the displayed amounts and your intended final volume before relying on it.

What to expect

You can identify which quantity each figure represents, or send us a calculation question with enough detail to investigate.

Before changing saved information

Do not assume a report total is correct for a batch other than 128 oz. Check the copied entries. If a quantity is unclear or inconsistent, contact support before relying on it. This troubleshooting page does not prescribe treatment.

Reset or new entry lost the working calculation

iPhone, iPad and Android

Reset clears the working inputs and results. A calculation opened from a condition or favorite can also replace the values you expected to see. Working calculations are separate from saved reports.

What to do

  1. If Reset was tapped, reenter Weight, Strength and Index; Volume returns to 128, body selection to Average/Male.
  2. For case context, return to the original condition → Suggested Use Fluids → Use Fluid. For product/index only, use Favorites → Use Fluid.
  3. On iOS, the standalone tab may retain earlier entries. On Android, a Use Fluid handoff can replace the main working inputs. Use Reset only when ready to clear the current calculation.

What to expect

A clean working calculation or correctly prefilled context is available.

Before changing saved information

There is no calculator Undo/history recovery promised here. Reset does not delete saved reports, but an unsaved calculation may need reentry.

First Calculate does not scroll to results

iPhone, iPad and Android

After Calculate, the results may be farther down the page. The keyboard, text size and available screen space can affect what is visible.

What to do

  1. Dismiss the keyboard, reveal Calculate completely, and tap it once with valid inputs.
  2. If a validation error appears, use Calculate fails or fields look filled but nothing calculates. If calculation succeeds without moving, manually scroll to 03 Calculation Results.
  3. Record whether this is the first Calculate versus a repeat and whether entry was the main tab, a favorite, or a condition’s Use Fluid.
  4. If reproducible, preserve the numeric inputs and capture a redacted recording for support.

What to expect

Results can be read manually while any automatic-scroll defect is assessed.

Before changing saved information

Manual scrolling does not change a result. Do not reset/reinstall for this symptom or claim every previously reported scroll problem is fixed in all store builds.

Report is missing, or list is empty

iPhone, iPad and Android

Search, an unsaved draft, Recently Deleted, or device/local-data replacement can explain it.

What to do

  1. Reports/Embalmer’s Report → clear Search reports.
  2. If not found, gear → Recently Deleted Reports → locate it → Restore.
  3. If this was a new draft, Check whether Save completed; opening, printing or exporting alone does not save it to the list.
  4. If still missing, stop and check whether there was app deletion, Clear storage, backup import or changing phones before attempting reset/reinstall.

What to expect

Saved active reports appear; restored reports return to the list with their saved contents.

Before changing saved information

Reference Refresh/Reset does not recover an unsaved or permanently deleted report. Do not create a replacement before assessing backups if the original may be recoverable.

Cannot save report; Save returns a warning

iPhone, iPad and Android

Name and a valid integer case number are required. iOS disables top Save for a blank/whitespace name. Android also disables editing without active access.

What to do

  1. Keep the editor open. Enter Decedent name and a valid whole-number case number.
  2. Tap Save. If a duplicate-number warning appears, review the number before choosing Save Anyway.
  3. If saving fails, keep the draft open and note the exact error. Export a PDF copy if available before leaving.
  4. On Android, a read-only report may not have Save. Check Subscription / Restore Purchases.

What to expect

A successful Save closes/returns to the list; reopening confirms the information. A failed save leaves entries available for retry.

Before changing saved information

Do not force-close, Discard, reset or reinstall while a draft is the only copy. Export preserves a readable copy, not an editable saved report.

Case numbers repeat, skip, or did not reset after deletion

iPhone, iPad and Android

New cases use highest stored number plus one, including retained deleted reports. Case numbers are editable labels; records have separate identities.

What to do

  1. At Case number/Case Number, enter the intended valid whole number before saving.
  2. If duplicate was accidental, Cancel the warning, change the number, and Save.
  3. If duplicate is intentional, Save Anyway keeps a separate report; verify both entries in the list.
  4. Do not delete records merely to force the sequence back to one.

What to expect

The report keeps the selected number. Duplicate numbering does not overwrite the other report.

Before changing saved information

Changing a case number changes that report’s label and exported filename, not other reports’ identities. No separate automatic annual renumber/reset control was found.

Dropdown choice cannot be “unchecked” or duplicates/extra words remain

iPhone, iPad and Android

Many report dropdowns append comma-separated text rather than maintaining toggled checkmarks. Gender/race/body type/place replace a single value.

What to do

  1. Open the report and locate the affected field.
  2. For appended choices such as co-injection, cavity chemical, disinfectant, closure methods, arteries, veins, drainage or aspiration, tap the text and remove only the unwanted words/comma. Choosing the item again normally does not remove it.
  3. For a single-value field, select a replacement or edit/clear the text.
  4. Hispanic Origin has an explicit Clear selection action. Save the report and reopen to verify.

What to expect

The saved text contains only the intended choices.

Before changing saved information

This edits report content; it does not alter the fluid database or other reports. Do not treat every chevron menu like the multi-select Manufacturer filter.

Hispanic Origin extra field vanished or cannot clear the answer

iPhone, iPad and Android

The extra text belongs specifically to Other. Clearing/changing away deliberately clears that associated specification.

What to do

  1. Report → Hispanic Origin menu → choose the correct category.
  2. If choosing Other, fill Specify Hispanic origin.
  3. To leave unanswered, menu → Clear selection. Save and reopen.

What to expect

The selected answer and applicable specification are saved.

Before changing saved information

Clearing or changing away from Other removes its specification from the draft and then from saved data if saved.

Product dropdown is empty or missing a brand

iPhone, iPad and Android

Product menus use saved manufacturer choices and product classification. Android explicitly excludes hidden products; the current iOS menu builders do not explicitly filter hidden records. An existing iOS report editor can retain options loaded when it opened.

What to do

  1. Save the current report first.
  2. Fluids → Switch back → Manufacturer → All / All Manufacturers, or select the intended brand; Android: Done.
  3. Reopen the saved report and its product dropdown.
  4. If still missing, find the product in Fluids and check its stored Type/Use. Use typed report text when documenting a known actual product rather than guessing/reclassifying database data.

What to expect

Dropdown options reflect the eligible product types/uses and manufacturer selection.

Before changing saved information

Changing manufacturers also affects ordinary Analysis suggestions. Menus are conveniences, not proof that every available chemical is appropriate for a case.

Facility/embalmer/date/place keeps coming back

iPhone, iPad and Android

Facility and embalmer defaults carry into new reports; recent places appear as choices. Dates may be initialized by the editor. Existing reports retain their own saved fields.

What to do

  1. Open the report and review Facility name, Embalmer name, Place of death and both dates.
  2. Change the values for this report and Save. Nonblank facility/embalmer values from ordinary saved reports become later defaults; the fictional sample is excluded.
  3. For dates use manual month/day/year entry or the calendar/date control; confirm the final text before saving.
  4. To record a blank on this report, clear the field and Save; do not assume this erases the app’s separately remembered default or recent-place history.

What to expect

The report has the intended case-specific information; new defaults are understood.

Before changing saved information

A default is not evidence about the current decedent. Clearing the current report’s name fields may leave an older remembered default available on the next report.

Start/finish time is hard to enter

iPhone, iPad and Android

The report captures a start and finish pair rather than one time.

What to do

  1. iOS: report → Embalming time / finish control → select Start → Next: Finish time → select Finish → Done. Use Back to Start if needed.
  2. Android: open the time control → choose Start → Next: Finish → choose Finish → Done. Start/Finish controls allow revisiting either part; Cancel leaves without applying the picker.
  3. Review the displayed pair and Save the report.

What to expect

Both times are represented in the field and saved with the report.

Before changing saved information

Closing a picker is not the report Save step. Confirm dates separately if the treatment crossed midnight.

Body-mark number disappeared or description was removed

iPhone, iPad and Android

The same-spot tap toggles that mark. Numbers are shared across front/back and existing marks are not renumbered after a removal.

What to do

  1. Open the report → front/back body outlines.
  2. Tap an unmarked location once to add a numbered mark; enter its matching numbered description below.
  3. To remove a mark, tap on/near that existing mark once, then verify its associated description is gone. Other descriptions should stay attached to their numbers.
  4. If removal was accidental, before Save consider Back → Discard to return to the last saved version, but only if losing all other unsaved edits is acceptable. Otherwise re-add and reenter the description. Save when correct.

What to expect

Numbered marks and matching descriptions remain paired. New numbers follow the highest current number; gaps need not indicate corruption.

Before changing saved information

Removing a mark removes its description. Saving commits that removal. Discard abandons all unsaved changes in the editor, not just that tap.

Calculator prefill or body selection did not match report

iPhone, iPad and Android

The report receives a copy of available calculator information. Gender and body type need their own review, and the report’s choices may differ from the calculator’s choices.

What to do

  1. From Calculator, iOS: tap Save Embalmer’s Report after reviewing results, or Start Case Log when offered. Android: tap Save to Embalmer’s Report after results, or the contextual Embalmer’s Report link when offered.
  2. Review condition, product, index, strength, volume, total fluid amount and weight; then review report Gender and Body type independently.
  3. Correct the report fields to document the actual case, complete name/case number, and Save.
  4. If recalculating after a report was saved, review and edit that report deliberately rather than assume automatic synchronization.

What to expect

The saved report reflects reviewed values, not an unreviewed calculator snapshot.

Before changing saved information

No automatic update of historical reports from reference edits or new calculations. See Standard, Scientific, volume, bottles or report quantities seem inconsistent before approving non-128-oz report totals.

Recover a deleted report

iPhone, iPad and Android

Delete moves a saved report to Recently Deleted. It stays there until you restore it or choose Delete Permanently.

What to do

  1. Main tab → gear → Recently Deleted Reports.
  2. Locate the case by name/number → Restore.
  3. Return to Reports, clear search, reopen the restored report and verify its saved fields and marks.

What to expect

The report returns with its saved information; a restore failure leaves it in Recently Deleted.

Before changing saved information

Restore here restores a report, not purchases, factory records or an external backup. It cannot recover a report already permanently erased.

User wants a report permanently removed

iPhone, iPad and Android

This is the deliberate final erasure step, separate from normal Delete.

What to do

  1. If any doubt, Cancel and use Restore instead.
  2. Only with explicit permission: gear → Recently Deleted Reports → identify the correct case → Delete Permanently → confirm the permanent-deletion warning.
  3. Review the list afterward.

What to expect

The report is removed from Recently Deleted.

Before changing saved information

permanent erasure cannot be undone in the app. Existing exported PDFs/backups are separate copies and are not automatically erased. Confirm identity without requesting unnecessary private case information.

Fictional John Sample-Doe report missing or has different marks

iPhone, iPad and Android

Fresh installs seed a fictional sample; older installs are not guaranteed to receive it, and deletion does not mean it should regenerate. Earlier test-created fixtures can differ.

What to do

  1. Reports → clear search → check John Sample-Doe; also inspect Recently Deleted before concluding it is missing.
  2. Use Restore if you actually wants a deleted sample back.
  3. For a real record, use Add Report rather than repurpose the fictional sample. If exact factory sample content is needed, ask support to verify the installed version.

What to expect

The sample is distinguished from actual saved cases and test fixtures.

Before changing saved information

Do not reinstall or reset the app just to regenerate a sample. Sample content is an example, not treatment guidance.

Save Embalmer’s Report opened a form but no saved case exists

iPhone, iPad and Android

The calculator action opens a prefilled draft; the report requires its own successful Save.

What to do

  1. Calculator → review results. iOS: tap Save Embalmer’s Report, or Start Case Log when offered. Android: tap Save to Embalmer’s Report, or the contextual Embalmer’s Report link when offered.
  2. In the new report, review prefilled values, enter Decedent name, confirm case number and complete required case information.
  3. Tap the report’s top Save. Resolve duplicate/validation prompts deliberately. Reopen it from Reports to verify.
  4. If it failed to save, keep the form open and use Cannot save report; Save returns a warning.

What to expect

The report appears only after its own successful Save, not merely because its editor opened.

Before changing saved information

No automatic saving from opening, printing, sharing or picker Done. Prefill is a snapshot and needs review. Later calculator/reference changes do not rewrite it.

Move a body marker without losing its description

iPhone, iPad and Android

The current workflow removes/adds a marker; it does not provide a drag-to-move operation. Removal also removes its description.

What to do

  1. Before removing the mark, copy its description somewhere secure, or retain it temporarily for pasting in the form.
  2. Tap the old mark once to remove it. Tap the intended blank spot on the correct front/back diagram once to create a new mark.
  3. Paste or reenter the description under the newly assigned number; verify all associations and Save the report.
  4. If an accidental removal has not been saved, Discard can return to the earlier saved report only if losing ALL other unsaved edits is acceptable.

What to expect

The newly placed mark has the intended description. Its number may differ; remaining numbers do not have to become consecutive.

Before changing saved information

Removing a mark deletes its associated form text. No marker-level Undo or drag relocation is implemented. Recently Deleted restores whole deleted reports, not individual marker history.

Older Previously recorded description behaves differently from marker text

iPhone, iPad and Android

Historical free text is retained; it is not automatically converted into numbered markers. Its current editability differs by platform.

What to do

  1. iPhone/iPad: open the report → Condition when received. If Previously recorded description is shown as an editable field, make the intended correction and tap Save.
  2. Android: older text may appear as Previously recorded description without an editable field. Email us if that text needs correction.
  3. For new numbered observations, tap the front or back diagram and enter the matching Description.

What to expect

Older narrative remains separate from numbered observations. Available editing controls depend on your platform and version.

Before changing saved information

If you clear an older-description field, it may disappear immediately. Do not Save unless you intend to remove that text. Keep a copy before changing historical information.

Report order changes after editing, or a high case number is reused

iPhone, iPad and Android

Reports are loaded by last-updated time, newest first, rather than numeric case order. Next number is based on the highest currently stored number, including Recently Deleted; erasing the highest retained case can allow reuse.

What to do

  1. Clear Reports search and identify the report by both its case number and name.
  2. Open it and verify its saved contents. An ordinary Save updates its last-modified time, which can change its list position.
  3. For numbering, inspect Recently Deleted before changing labels. Enter the intended valid number explicitly and resolve duplicate warnings using Case numbers repeat, skip, or did not reset after deletion.

What to expect

Order and numbering are explained without merging or deleting records.

Before changing saved information

Case numbers are editable labels, not an immutable audit sequence. Do not permanently delete cases to manipulate numbering. Existing exported files remain separate historical copies.

Print/export exactly one report

iPhone, iPad and Android

Batch actions include all saved reports, irrespective of report search.

What to do

  1. Reports → open the one intended report → More.
  2. iOS: Export PDF / Share for a PDF share sheet, or Print for print preview.
  3. Android: Export PDF for a file destination, Print for Android printing, or Share for the sharing chooser.
  4. Review the case title/number and pages before sending or printing. Save separately if the current report edits should remain in the app.

What to expect

Only that open report is output, using its current shown contents, including unsaved edits in an editable report.

Before changing saved information

Output is not Save. A single report PDF can contain several pages. Exported case information may be sensitive; confirm destination/recipient.

Print/export all reports or create a ZIP

iPhone, iPad and Android

Combined PDF and ZIP have different purposes; the batch action ignores report search filters.

What to do

  1. Gear → Print / Export Embalming Reports.
  2. iOS: Export All PDF / Share or Print All. Android: Export PDF, Print or Share for the combined saved-report collection.
  3. For individual files plus recovery data, choose Export Report Archive (.zip), then choose a destination and complete the system Save/Share flow.
  4. Open the saved file outside the app to confirm it exists and has the expected reports.

What to expect

PDF contains active saved reports, with each report beginning on a new page. ZIP contains individual PDFs, index and recovery data. No saved reports means actions are disabled or unavailable. Recently Deleted reports are not active-report PDFs; the database/full-backup recovery data can still contain deleted records.

Before changing saved information

HIGH privacy sensitivity: batch includes all active saved reports, not only the searched case. Unsaved drafts are excluded. iOS and Android recovery file formats are not interchangeable.

Save/share sheet opened, but no file appeared

iPhone, iPad and Android

The system sheet may have been canceled, no destination chosen, a cloud provider unavailable, or file output failed.

What to do

  1. Create output again from the intended report or SDS action.
  2. iOS: in the share sheet choose Save to Files, pick an accessible folder, then Save; or select the intended sharing app and finish its prompts.
  3. Android: Export PDF/ZIP → choose a folder and filename in the system file screen → Save. Share is a separate action. To cancel use Android Back.
  4. Open Files/the selected provider outside EmbalmPro and locate/open the document. Try a local destination to isolate a cloud-provider issue.

What to expect

A completed export is visible at the chosen destination; canceling returns without creating the requested file.

Before changing saved information

Canceling output does not delete the report. No automatic export to an unknown folder should be promised. Do not request an unredacted report by email.

Printer not found or printing fails

iPhone, iPad and Android

Printer/network/OS print-service issues are possible. A failure before preview may instead be app document generation.

What to do

  1. Open the relevant report/SDS → More → Print (iOS SDS: Print SDS). Check whether preview renders.
  2. iOS: confirm an AirPrint-capable printer and phone/tablet are on the same Wi-Fi network; choose printer and print options, then Print.
  3. Android: choose an available printer in Android’s print panel; if none is available, check the phone’s configured print service/printer support. Save as PDF if the system offers it.
  4. If preview works, try exporting/opening the PDF separately to distinguish printer delivery from document creation.

What to expect

Preview confirms content generation; printer selection/job status is checked separately.

Before changing saved information

Printing does not save unsaved report edits. Do not reset app data to fix a network printer. Actual physical printing is not guaranteed by a successful preview.

PDF missing text, body marks, or has unexpected page count

iPhone, iPad and Android

Wrong output scope, unsaved versus saved snapshot, missing stored content, or a rendering defect may explain it. A fixed page count is not expected.

What to do

  1. Confirm single report versus batch and verify report or SDS contents on screen.
  2. For batch output, save intended edits first and export again. For an individual editable report, current on-screen edits should be used.
  3. Open the PDF in another available viewer. Check all pages and front/back diagrams.
  4. If mismatch persists, stop altering the source and contact support with redacted pages showing the defect.

What to expect

Output matches the appropriate source, or a reproducible rendering problem is captured. Long text may legitimately continue to more pages.

Before changing saved information

Do not delete/recreate the report or reset the database as a formatting fix. Keep the original and redacted example.

Batch export is disabled or a ZIP export fails

iPhone, iPad and Android

Report batch output requires at least one active saved report. An unsaved draft or a report in Recently Deleted is not an active saved report. A destination, storage or generation failure is also possible and needs its exact error.

What to do

  1. Reports → clear search → verify a saved report exists. If the intended report is in Recently Deleted, restore it only if appropriate.
  2. Gear → Print / Export Embalming Reports → try the intended output again, completing the system destination/Save step. Try a local folder to isolate a cloud-provider problem.
  3. If ZIP fails, test a single report PDF and retain the exact error. Open any resulting file outside EmbalmPro before treating it as a successful recovery copy.
  4. Android: for a full backup with no active reports, use Settings → Backup / Export Data. iOS has no equivalent general backup button; do not assume the disabled report ZIP is available with zero active reports. contact support if a recovery copy is needed before a risky change.

What to expect

A verified completed file is available, or the failed stage is narrowed down without changing records.

Before changing saved information

Do not reset/delete records to repair an export. Do not overwrite the only known good backup with an unverified or partial file. Readable PDF export is not an editable-data restore.

Product exists in Fluids but not SDS

iPhone, iPad and Android

SDS browsing requires text in Identification, Hazards, Composition and Accidental Release; hidden products are omitted. SDS search differs from Fluids.

What to do

  1. SDS → clear search; try product name or manufacturer, not a chemical sentence from a section.
  2. If absent, go to Fluids → product → its SDS link or SDS unavailable/incomplete → Add/Complete SDS.
  3. Check those four required sections and Hidden Fluids. Save only verified manufacturer content; use Add or complete SDS for a newly created product for the editor.
  4. Use SDS → More → Refresh after saving if the list appears stale.

What to expect

A visible product with all four essentials can appear in SDS browsing; other missing sections still produce Incomplete SDS.

Before changing saved information

Text-presence checks do not verify accuracy. Do not fill missing sections with invented text merely to gain list eligibility.

Add or complete SDS for a newly created product

iPhone, iPad and Android

Product creation and SDS editing are separate steps.

What to do

  1. Fluids → Add Fluid → enter product details → Save.
  2. Reopen the saved product → scroll to SDS unavailable/incomplete → Add/Complete SDS.
  3. iOS: on SDS Details tap Edit → Add / Edit SDS form. Android: Add/Complete SDS opens the SDS editor.
  4. Enter verified manufacturer text, Save, then reopen SDS. iOS also exposes GHS hazard toggles in this form; the current Android editor exposes the sixteen section text fields, not matching hazard-flag toggles. contact support an Android flag correction rather than invent a missing control. For a listed SDS, open it from SDS and use Edit at the top.

What to expect

The draft is saved on the same product; four essential sections enable browsing and all sixteen nonblank sections remove the missing-section status.

Before changing saved information

Do not guess hazards, exposure limits, phone numbers or applicability. Draft saving is not regulatory validation. Saved factory SDS edits can later be replaced by Reference Reset.

Incomplete SDS or User Modified label remains

iPhone, iPad and Android

Incomplete means one or more of sixteen stored sections is blank. person Modified identifies local safety-content edits; it is not an export failure.

What to do

  1. SDS → product → View Entire SDS on iPhone/iPad, or View Full SDS on Android. Review all numbered sections.
  2. Use verified manufacturer material to complete the relevant section, then Save and reopen it.
  3. If the original material lacks information, leave the notice in place and consult the manufacturer. Do not invent missing content.

What to expect

Stored updates appear; Incomplete remains whenever any section is still blank. Modification history is a label/timestamp, not a full version-history browser.

Before changing saved information

Do not promise a complete/accurate SDS simply because the warning disappears. Resetting factory SDS removes personal edits.

Cannot find a section, full sheet, or individual-section edit

iPhone, iPad and Android

SDS has several levels with different action menus.

What to do

  1. SDS → product → tap the numbered section to read it. For the complete stored sheet, tap View Entire SDS on iPhone/iPad or View Full SDS on Android.
  2. Product/full-sheet page: Edit opens SDS editing. iOS individual section: More → Edit opens the full Add / Edit SDS form in the current reachable route; make the intended section change there, then Save. do not assume a separate section-only Save Changes prompt. Android individual section: Edit in the top bar opens that section’s editor.
  3. Use Back to return one level. Read the page title before selecting Print/Export.

What to expect

The intended section or full sheet is reached without another product search.

Before changing saved information

Editing a section changes the same product’s local SDS, not a separate copy. The displayed source filename is not a guarantee of an online/downloadable original PDF.

Hazard symbol or emergency-call button missing

iPhone, iPad and Android

Pictograms depend on stored flags; call actions require recognizable stored contact information and an available calling interface.

What to do

  1. Open product SDS → inspect Hazards and Emergency Contact text, not just icons.
  2. If information appears wrong, compare with the original manufacturer SDS and report the specific discrepancy; edit only verified information if authorized.
  3. Android Emergency Call opens the dialer for review. iOS uses the available phone/calling interface. An iPad may not offer the same calling behavior as a phone.

What to expect

A valid stored number can open a calling interface; absence is distinguished from a malfunction.

Before changing saved information

Do not place an unnecessary emergency call to test the button. Missing symbols or a call button do not mean the chemical is safe. Use verified manufacturer information; do not invent hazard classifications or phone numbers.

Export or print SDS

iPhone, iPad and Android

Output is in the product/full-sheet More menu, not the browse Refresh menu.

What to do

  1. SDS → open the intended product → More.
  2. iOS: Export SDS PDF or Print SDS. Android: Export PDF, Print or Share. The full-sheet page also has these actions.
  3. Review product/manufacturer and all generated pages, then complete system Save/Share/Print. Use Save/share sheet opened, but no file appeared/Printer not found or printing fails if the system destination fails.

What to expect

The chosen product’s stored SDS is output, with incomplete/modified notices where applicable.

Before changing saved information

Output reflects local stored content, including edits; it is not a fresh manufacturer download. No data is restored by printing or sharing.

Emergency action offers the wrong number or multiple contacts are confusing

iPhone, iPad and Android

iOS selects the first recognizable complete number from its stored contact text; it is not a contact chooser. Android parses contacts into separate labeled call buttons when recognizable. Formatting and calling capability can affect the handoff.

What to do

  1. Read the entire Emergency Contact block for the intended product. Compare the desired number with the current original manufacturer SDS.
  2. iOS: do not assume a single button chooses among multiple contacts. Android: read the number and label on the particular contact button before tapping.
  3. Only when a real call is intended, use the verified appropriate number through the available calling interface; otherwise report the extraction/display discrepancy without placing a test call.

What to expect

The intended contact is identified, or We have the exact text and offered destination for review.

Before changing saved information

Never place unnecessary test calls to emergency contacts. Do not infer or invent a missing contact number. A missing button does not mean no emergency response is needed.

SDS PDF looks different from the manufacturer sheet

iPhone, iPad and Android

The app creates output from stored SDS fields rather than reproducing the original manufacturer PDF. Missing-information notices and conservative summaries avoid inventing absent material.

What to do

  1. Open the intended SDS and confirm product/manufacturer and the stored section in question.
  2. Use More → Export SDS PDF on iOS, or the corresponding Android Export PDF action. Complete saving and open the new file externally.
  3. Compare that numbered section with both the app and the original manufacturer source. Read every page and any Information not recorded notice.
  4. For clipped/missing text that is present in the app, preserve a redacted example and use PDF missing text, body marks, or has unexpected page count to contact support a rendering mismatch.

What to expect

Stored reference content and layout differences are separated from an actual missing-text defect.

Before changing saved information

Export does not fetch a current online sheet or verify completeness/accuracy. Do not remove missing-information notices to improve appearance; use the manufacturer source for missing/current information.

Recorded hazard summary is short or says to read Section 2

iPhone, iPad and Android

The short front summary is separate from the full Section 2. If the app cannot confidently summarize the stored hazard statements, it displays a reminder to read that section.

What to do

  1. Open the intended product’s newly exported SDS PDF and verify product/manufacturer.
  2. Go to the numbered Section 2, Hazards identification, and read the full recorded material. Compare with the original manufacturer SDS where information is incomplete or disputed.
  3. If a recognizable statement appears missing from the front summary, preserve the exact H-code and wording, product, section and PDF page for support. Do not edit source text simply to make a summary appear.

What to expect

The short summary and the full numbered hazard information are understood as separate parts of the output.

Before changing saved information

The reminder does not mean the product has no hazards. Read full Section 2 and consult the original manufacturer SDS. Do not alter safety text just to change the summary.

Composition Exposure or Toxicology prints as plain text instead of a table

iPhone, iPad and Android

Some safety information fits a table; other information stays as text so its values and relationships can be retained.

What to do

  1. SDS → intended product → open the numbered section to inspect stored text.
  2. Product or full-sheet More → Export SDS PDF on iOS, or Export PDF on Android → finish saving → open the new file.
  3. Compare every ingredient, source, limit type, concentration and supporting note in the relevant numbered section. A plain-text block is acceptable if its content remains readable and complete.
  4. If anything is dropped, duplicated, clipped or attached to the wrong ingredient/source, stop trying to reformat it and contact support the exact value, product, section and page.

What to expect

The section remains readable whether presented as a table or text. There is no setting to force every product into a table.

Before changing saved information

A text layout alone is not a fault. Do not change safety values or reset the database to change formatting. Email us if a value is missing, clipped, repeated or attached to the wrong ingredient.

Refresh did not fix missing/old data

iPhone, iPad and Android

Refresh rereads information already on your device. It does not download an online database, clear filters, unhide items or undo edits.

What to do

  1. Fluids, SDS or Favorites → More (three dots) → Refresh.
  2. If the list is empty, clear search/active filters and check Hidden Items separately.
  3. For newer bundled reference information, install the appropriate store update and reopen the app. If a local edit overrides the updated factory value, contact support before resetting.

What to expect

Current local visible data reloads; filters and stored edits remain.

Before changing saved information

Refresh is low risk but not a backup/restore. There is no dedicated Analysis Refresh control in these versions; return/reopen the page or Reset Filters only for search restrictions.

New app update did not show expected factory changes

iPhone, iPad and Android

Reference updates arrive with app updates. Your personal changes can be retained, so an edited record may not match newer factory information.

What to do

  1. Check your app version and whether an update is available in your store. Save drafts before closing the app.
  2. Reopen EmbalmPro, then use the list’s Refresh if needed. Clear filters and check Hidden Items for a missing record.
  3. Note the exact record and field you expected to change, including whether you edited it yourself.
  4. Email us if the expected information is still missing. Do not reset the database just to receive a normal update.

What to expect

Expected untouched factory information updates, or the preserved override/update issue is identified.

Before changing saved information

Automatic reference updates differ from Reset: Reset intentionally replaces factory edits/status. Back up before considering it.

Export a recovery copy before risky work

iPhone, iPad and Android

Readable PDFs and editable-data backups serve different purposes.

What to do

  1. iOS: gear → Print / Export Embalming Reports → Export Report Archive (.zip) → Save to Files → choose a secure destination → Save. Open the ZIP externally to confirm it exists. This action needs at least one active saved report.
  2. Android: gear → Backup / Export Data → choose a location for EmbalmPro-backup.json → Save. This is the full backup route, including when there are no active reports.
  3. Android alternative with saved reports: Print / Export Embalming Reports → Export Report Archive (.zip), containing individual PDFs and the full JSON backup.
  4. Keep readable PDFs too if needed. Verify the destination, file size/date and ability to open/copy the file before proceeding.

What to expect

A recoverable data copy (format dependent) and/or readable report copies are retained outside the app.

Before changing saved information

iOS has no in-app ZIP/database import in this version, and its report archive is not a guaranteed one-click full preference restore. Android full backup includes local records/preferences but never grants subscription access. Store case data securely.

Reset factory reference information as a deliberate last resort

iPhone, iPad and Android

Reference reset replaces factory fluids/conditions/hazards/SDS and factory hidden/discontinued status. It is not a general cure for every failure.

What to do

  1. First establish the exact issue and export a recovery copy using Export a recovery copy before risky work. Prefer Unhide for one hidden record and Reset Filters for a search issue.
  2. iOS only: gear → Database Management → Reset Database → Continue → Reset Reference Data.
  3. Android only: gear → Database Management → Reference Data Reset → Reset Reference Data.
  4. After success, reopen the relevant list, clear filters if required, and verify the exact factory record. Stop and capture any failure message instead of repeatedly resetting.

What to expect

Factory reference data returns to the installed app’s defaults. person-created records/SDS, reports and favorite preferences are preserved; hidden factory records reappear.

Before changing saved information

saved edits to factory records/SDS are replaced and there is no Undo. This is not a full wipe or online update; it does not recover deleted custom records. Android reset requires active access.

Restore / Import Data on Android

Android

Android import is validated replacement, not merge. A PDF, ZIP itself, or iOS SQLite export is not the supported Android JSON backup.

What to do

  1. Android: gear → Backup / Export Data → save the current phone’s backup first.
  2. Gear → Restore / Import Data → select a supported EmbalmPro-backup.json made by Android.
  3. If the backup came in a report ZIP, extract it in a file manager first and select EmbalmPro-backup.json, not the ZIP.
  4. Read Restore backup? → confirm Restore only if replacing current local records/preferences with this backup is intended. After “Backup restored,” check reports, favorites, edits and subscriptions separately.

What to expect

A compatible backup replaces local information. If an error appears, check that your existing records remain and follow the backup-import failure instructions.

Before changing saved information

newer data absent from the backup is lost from the current app on successful replacement. Import does not combine two phones or restore subscription rights. Never use it as a casual Refresh.

iPhone/iPad user cannot find import or recover an exported ZIP

iPhone and iPad

This iOS version provides exports, not an in-app editable backup import.

What to do

  1. Note whether your saved file is a PDF, ZIP or another backup format.
  2. For a report in Recently Deleted, use its Restore button. That is separate from importing a file.
  3. Keep the app installed and preserve your current records and original exported files.
  4. Email us before attempting recovery. iPhone/iPad does not offer the Android Restore / Import Data workflow.

What to expect

The export is preserved and recovery limitations are explained honestly. PDFs remain readable externally.

Before changing saved information

Do not delete the app or assume an Android backup can be imported on iPhone/iPad. PDFs are readable copies, not editable-report imports.

Favorites/reports missing after reinstall or phone change

iPhone, iPad and Android

App-local records are separate from store subscription history. Deleting/Clear storage or importing another backup can remove/replace local data; an app update is different.

What to do

  1. Do not delete or reset anything else. Check report search, Recently Deleted and Hidden Items first.
  2. Check whether the action was Update, Offload, Delete/Uninstall, Clear cache, Clear storage/data, or backup import; do not treat them as synonyms.
  3. Locate existing backups/exports and the old device. Android supported full JSON recovery uses Restore / Import Data on Android; iOS recovery assessment uses iPhone/iPad person cannot find import or recover an exported ZIP.
  4. For subscription access use the platform’s Restore Purchases separately.

What to expect

Data recovery and purchase restoration are handled as different problems. Built-in fluids alone do not prove personal data survived.

Before changing saved information

do not recommend reinstall/Clear storage as a routine first step. No automatic in-app cloud sync or cross-platform data/subscription transfer is established by these apps.

Android backup import fails or reports an unsupported format

Android

The file may be a ZIP, PDF, incompatible backup or incomplete download. EmbalmPro needs a complete, supported Android JSON backup.

What to do

  1. Dismiss the error without deleting the backup or resetting the app. Return to Reports and verify existing cases are still present.
  2. Check that the selected file is an Android EmbalmPro-backup.json. If starting from a report ZIP, extract that JSON first. Make the complete file available locally if its storage provider has not downloaded it.
  3. Before retrying any replacement, use Settings → Backup / Export Data to save a separate copy of the current device. Keep the original known-good backup unchanged.
  4. Retry Settings → Restore / Import Data only with the intended compatible JSON. Confirm Restore only when replacement is intended. After success, verify representative reports, custom records and favorites.
  5. If it fails again, stop and send the exact message and backup details to support. If current records changed unexpectedly, stop further imports and preserve the device and both backups.

What to expect

A compatible backup restores and its records can be reopened. If restoration fails, check your previous records and email us rather than assuming recovery succeeded.

Before changing saved information

A successful import replaces current data rather than merging it. Do not rename a PDF or ZIP to .json, hand-edit backup contents, overwrite the only good backup, or reset/reinstall to bypass validation. This is separate from Restore Purchases.

Subscribed user sees offer or no Get Started on iOS

iPhone and iPad

Possible expired/revoked purchase, wrong purchasing Apple Account, offline check, or failed verification. A thank-you banner alone is not active entitlement.

What to do

  1. Connect to the internet. Welcome (or gear → About EmbalmPro) → Restore Purchases.
  2. If restored, tap OK → Get Started. If “No active subscription was found,” verify the subscription/account in Apple’s subscription management before buying again.
  3. Use Manage Subscription when available, or the device’s Apple subscription settings. Confirm the same Apple Account used for the purchase.
  4. If Apple shows active access but restore still fails, preserve the receipt/status and contact support; use Having issues? / Show Options if displayed.

What to expect

Verified active access shows Manage Subscription and Get Started. No-active result does not grant access.

Before changing saved information

Restore Purchases checks your subscription, not local reports or Favorites. Do not purchase again just to troubleshoot. Never send passwords or verification codes.

Restore Purchases seems to do nothing, fails, or reports nothing found

iPhone, iPad and Android

Restore can need connectivity/store authentication; failures differ from a successful check with no active subscription.

What to do

  1. iOS: connect → Welcome → Restore Purchases → wait for Processing to finish; complete only Apple’s own authentication prompts on device.
  2. Read the result exactly: “Your active subscription has been restored,” “No active subscription was found for your Apple Account,” or Subscription Issue. Do not label all three as success.
  3. For a failure, use the offered retry/options after correcting connectivity. For none found, check the purchasing Apple Account and active subscription status.
  4. Android: Settings → Subscription / Restore Purchases → Restore Purchases; read the in-page status using Android subscription missing, purchase pending, or offline access ended.

What to expect

You can separate successful restore, no current entitlement and a failed check.

Before changing saved information

Do not purchase repeatedly to resolve a restore problem. Never email store passwords, verification codes or payment-card details.

Android subscription missing, purchase pending, or offline access ended

Android

Possible explanations include a different purchasing Google account, a pending payment, expired access or a connection problem. Offline access is limited, so reconnect to check your subscription.

What to do

  1. Connect to the internet → gear → Subscription / Restore Purchases → Restore Purchases.
  2. Read the status: Subscription active, Purchase pending, offline message or error. A pending purchase does not unlock access.
  3. Tap Manage Subscription to check Google Play; confirm the Google account that actually purchased the subscription. Do not repurchase until account/status is established.
  4. If Google Play shows active but EmbalmPro still denies access, capture the exact message and contact support.

What to expect

Valid verified access enables professional features. The code retains previously verified offline access for up to three days after its last successful check; existing reports remain readable/exportable afterward.

Before changing saved information

A data backup does not restore a subscription. Expiration does not erase your records. A purchase through Apple does not automatically provide a Google Play subscription.

Canceled subscription still works, or expires later

iPhone, iPad and Android

Cancellation usually stops future renewal rather than ending the already paid/trial access immediately; confirm the store’s actual status/date.

What to do

  1. Open the app’s Manage Subscription or the store subscription management screen.
  2. Read renewal/cancellation/expiration status and the access-end date; do not infer it from a payment email alone.
  3. Return to EmbalmPro and use Restore Purchases if status needs rechecking. If the store says expired but the app differs, record the discrepancy and relaunch only after saving drafts.

What to expect

Access is explained against store status. A verified expired subscription should not be treated as active.

Before changing saved information

Uninstalling the app does not cancel a subscription. Check the store’s cancellation and access-end status. Contact the store about billing or refund questions.

Free-year banner missing or displayed beside subscription offer

iPhone and iPad

The thank-you offer and current subscription status are separate. Offers can have purchase-history requirements and a redemption deadline.

What to do

  1. On Welcome, check whether you are seeing A free year, with our thanks or the ordinary subscription offer.
  2. Use Restore Purchases or Manage Subscription separately to check current access.
  3. If a redemption button is available, read Apple’s confirmation carefully. Email us the exact error if redemption is refused.

What to expect

You can distinguish a promotional offer from an active subscription and report a redemption problem.

Before changing saved information

Use the deadline and eligibility shown for your offer. A banner is not proof that redemption succeeded. Do not send passwords, verification codes or a private redemption code in a public screenshot.

Get Started returns to Settings rather than Fluids

iPhone and iPad

The About presentation dismisses to its caller. This does not indicate access failure.

What to do

  1. Tap Back from Settings to return to the main app, or use an available main tab.
  2. Confirm Fluids/Calculator opens with active access.
  3. If Welcome cannot be dismissed and access is missing, use Subscribed person sees offer or no Get Started on iOS/Restore Purchases seems to do nothing, fails, or reports nothing found rather than treating the destination as a navigation error.

What to expect

The person reaches the main app without changing records.

Before changing saved information

Don’t show this screen again is a welcome-display preference, not a subscription bypass or cancellation.

Need reports while subscription is expired

iPhone, iPad and Android

Access gating differs by platform; saved reports are not the same as editing access.

What to do

  1. Android: if Reports is available, open a saved case and use More → Export PDF, Print or Share. Settings also provides report output and Backup / Export Data where offered.
  2. iPhone/iPad: if Welcome shows Print / Export Embalming Reports, use it to export saved reports. If that link is not shown, email us your app version before changing or deleting anything.
  3. With access to the main app, use Settings → Print / Export Embalming Reports.
  4. If an available export page shows no records, check search and Recently Deleted, and tell us whether the reports were saved on this same installation.

What to expect

You use the report-output route available in your version. If it is not available, we can advise you without risking saved information.

Before changing saved information

Export may contain private case data; choose a secure destination. Subscription expiry is not an instruction to erase local records.

Subscribe is disabled, keeps loading, or price is unavailable

iPhone, iPad and Android

Subscription details require an internet connection and a working connection to the store. Trial eligibility depends on the purchasing account.

What to do

  1. Confirm your internet connection. Keep the existing app and its data intact.
  2. iPhone/iPad: reopen Welcome and read any message. Use Show Options or Having issues? if offered, or Restore Purchases if you already paid.
  3. Android: open Subscription help, or Settings → Subscription / Restore Purchases → Restore Purchases. Read the exact status.
  4. If details still do not load, email us the message, device, app version and where you installed the app.

What to expect

Store details become available or a specific connection/configuration/eligibility issue can be investigated.

Before changing saved information

Do not repeatedly subscribe to fix missing pricing. Read the actual price and terms in the store’s confirmation. Never send store passwords or verification codes.

Crash, frozen loading, or unexplained operation error

iPhone, iPad and Android

Cause is not established from a screenshot alone; it may be app state, storage, document provider, database or OS behavior.

What to do

  1. If a draft is visible, save it if possible. Preserve a readable copy before restarting.
  2. For a list-only problem, try that page’s Refresh. On Android, use Retry if it is shown during loading. Otherwise close and reopen once after saving.
  3. If it happens again, note one short sequence from opening the page to the failure. Do not reset or delete information.
  4. Email us your device, app version, exact message and a screenshot with private case details covered.

What to expect

A reproducible, bounded issue is captured without wiping data.

Before changing saved information

Do not recommend Delete App, Clear storage/data, factory reset, database replacement or account sign-out as the default. Not every OS keyboard warning proves an app failure. Do not suppress intentional strength/SDS cautions.

What each action changes

Refresh, hide, remove and reset do different things. Check the action before confirming it.

Refresh

Reloads information already on your device. It keeps your edits and filters; it does not download a new database.

Reset Filters

Clears the search and filter restrictions on that page. On Fluids, this also clears your saved manufacturer selection.

Unselect

Changes a choice. Manufacturer choices toggle on and off; other filters use All. Many report menus add text, which you remove by editing the field.

Remove Favorite

Removes the star membership, not the fluid or its SDS. You can add it again.

Hide and Unhide

Hide takes a factory fluid or condition out of browsing. Unhide brings it back with its edits intact.

Discontinued

Keeps the fluid and SDS available for reference but excludes it from new suggested-fluid results.

Delete a report

Moves it to Recently Deleted. You can restore it from Settings.

Delete Permanently

Erases a report from Recently Deleted. There is no Undo; earlier exported copies remain separate.

Delete a custom fluid or condition

Permanently removes that custom record. A fluid’s SDS goes with it. It does not go to Recently Deleted Reports.

Remove a body mark

Removes that marker and its matching description from the draft. Save keeps that change.

Restore Purchases

Checks your store subscription. It does not restore reports or a data backup.

Restore / Import Data

On Android, replaces local information with a compatible backup. It does not merge. Back up the current phone first.

Reset Database / Reference Data Reset

Restores factory reference information and replaces edits to factory records. Reports and custom records are retained. Make a recovery copy first.